4
Disassembly/Assembly > Controller System > Removing the Main Drive Unit (TYPE II) > Procedure
Removing the Main Drive Unit (TYPE II)
■
Preparations
1) Removing the Right Cover.(Refer to page 4-23)
2) Removing the Left Cover.(Refer to page 4-19)
3) Removing the Controller Cover.(Refer to page 4-55)
4) Removing the Left Rear Cover.(Refer to page 4-22)
5) Removing the ADF Unit + Reader Unit.(Refer to page 4-33)
6) Removing the Upper Cover Unit.(Refer to page 4-28)
7) Removing the Rear Cover Unit.(Refer to page 4-27)
■
Procedure
1) Remove the Duplex Reverse Sensor Unit [1].
1 Connector [2]
•
1 Wire Saddles [3]
•
1 Harness Guide [4]
•
1 Screw [5]
•
[1]
x2
[5]
4
Disassembly/Assembly > Controller System > Removing the Main Drive Unit (TYPE II) > Procedure
[2]
[3]
[4]
F-4-191
2) Remove the Harness [1] from the 2 Harness Guide [4].
3 Connectors [2]
•
1 Cable Clip [3]
•
x3
[4]
x3
[1]
3) Remove the Harness [1] from the Harness Guide [2].
4 Connectors [3]
•
x4
[2]
[2]
[1]
[2]
4-81
[3]
[2]
F-4-192
[3]
[1]
[2]
[2]
F-4-193
4-81