Canon mf6600 Series Service Manual page 119

4
Disassembly/Assembly > Controller System > Removing the Controller Box (TYPE II) > Procedure
4) Remove the Controller Box [1].
4 Screws [2]
•
x4
[1]
4 Disassembly/Assembly > Controller System > Removing the Controller Box (TYPE II) > Procedure
[2]
[2]
F-4-132
Removing the Controller Box (TYPE II)
■
Preparations
1) Removing the Right Cover.(Refer to page 4-23)
2) Removing the Left Cover.(Refer to page 4-19)
3) Removing the Left Rear Cover.(Refer to page 4-22)
4) Removing the Controller Cover.(Refer to page 4-55)
5) Removing the NCU PCB.(Refer to page 4-58)
6) Removing the ADF/Reader Driver PCB.(Refer to page 4-55)
7) Removing the Main Controller Board.(Refer to page 4-56)
■
Procedure
1) Remove the 2 Harnesses [1] from the Harness Guide [2].
1 Edge Saddle [3]
•
4-62
[2] [3]
[1]
[1]
F-4-133
4-62