4
Disassembly/Assembly > Controller System > Removing the Controller Box (TYPE II) > Procedure
2) Remove the Harness Guide [1].
3 Claws [2]
•
x3
3) Remove the Flat Cable [1] from the Harness Guide [2].
4
Disassembly/Assembly > Controller System > Removing the Controller Box (TYPE II) > Procedure
[1]
[2]
F-4-134
[2]
[1]
F-4-135
4) Remove the Harness [1] from the Harness Guide [2] and the Edge Saddle [3].
[1]
[2]
CAUTION:
Attach the Engine Controller PCB Harness [1], the Speaker Harness [2], and the
Manual Tray Pickup Solenoid Harness [3] in this order. When install the Controller Box.
[1]
[2]
4-63
[3]
[2]
F-4-136
[3]
F-4-137
4-63