<035: - 036:Reader Motor Speed Change; 041: Vertical Scan Start Position Adjustment (When Scanning On A Document Fed From Adf); 047: Vertical Scan Magnification Correction (When Scanning On A Document Fed From Adf); 048: Horizontal Scan Magnification Correction (When Scanning On A Document Fed From Adf) - Canon mf6600 Series Service Manual

<035: - 036:Reader motor speed change>
Though no market adjustment work needs to be carried out, enter factory defaults at image
processor PCB replacement.
<041: Vertical scan start position adjustment (when
scanning on a document fed from ADF)>
Adjust the position at which vertical scanning of a document fed from the ADF starts. The
larger the adjustment value, the narrower the left-side margin of the image becomes.
<047: Vertical scan magnification correction (when
scanning on a document fed from ADF)>
Correct the magnification of vertical scanning of a document fed from the ADF. The larger
the adjustment value, the more the image stretches in the vertical scanning direction.
<048: Horizontal scan magnification correction (when
scanning on a document fed from ADF)>
Correct the magnification of horizontal scanning of a document fed from the ADF. The
smaller the adjustment value, the more the image stretches in the horizontal scanning
direction.
This menu is used to adjust the ADF feed motor speed. If you changed the adjustment
value in this mode, the adjustment value selected for SCAN NUMERIC>54 must also be
incremented/decremented by the same amount.
Do not change the adjustment value extremely.
8
Service Mode > Printer Function Settings (Printer) > Numeric Parameter Settings (NUMERIC Param.) > <035: Left-end registration adjustment (cassette)>
8 Service Mode > Printer Function Settings (Printer) > Numeric Parameter Settings (NUMERIC Param.) > <035: Left-end registration adjustment (cassette)>

Printer Function Settings (Printer)

Service Soft Switch Settings (SSSW)

■

SSSW-SW15

● List of Function
Bit Function
0 Not used
1 Not used
2 Not used
3 IFAX Permission of split recording of text data
4 Not used
5 Not used
6 Not used
7 Not used
●
Detailed Discussions of Bit 3
Select whether split recording is to be enabled when text data such as a header and body
text is recorded. Selecting "Set" may split text data when a small paper size such as A5 is
selected. In this case, a page may be split in the middle of a character string.

Numeric Parameter Settings (NUMERIC Param.)

<034: Left-end registration adjustment (malti-purpose tray)>
■
Adjust the left-end registration margin of paper picked from a multi-purpose tray. The larger
the adjustment value, the wider the left-end margin of the image becomes.
■ <035: Left-end registration adjustment (cassette)>
Adjust the left-end registration margin of paper picked from cassette. The larger the
adjustment value, the wider the left-end margin of the image becomes.
8-20
1 0
- -
- -
- -
Enable Disable
- -
- -
- -
- -
T-8-36 T-8-36
8-20