Canon mf6600 Series Service Manual page 137

4
Disassembly/Assembly > Controller System > Removing the Main Drive Unit (TYPE I) > Procedure
9) Remove the Plate [1], the Fan Gear [2] and the Link Arm [3].
2 Screws [4]
•
[3] [4]
x2
CAUTION :
Points to Note When Removing the Main Drive Unit.
Since the Gear of the Main Drive Unit is not Fixed, be Careful Not to Drop it When
Removing it.
4 Disassembly/Assembly > Controller System > Removing the Main Drive Unit (TYPE I) > Procedure
[1] [2] [4]
F-4-189
10) Remove the Main Drive Unit [1].
4 Screws [2]
•
CAUTION :
Cushion Sheet [3] Attached to the Main Drive Unit Needs to be Purchased Separately
at Replacement; Thus, Check the Affixing Position After Removing the Unit.
[2]
x4
4-80
[1]
[2] [3] [2]
F-4-190
4-80