4
Disassembly/Assembly > Document Exposure, Feed System > Removing the Reader Motor Unit > Procedure
Removing the Reader Motor Unit
■
Preparations
1) Removing the Left Cover.(Refer to page 4-19)
2) Removing the Controller Cover.(Refer to page 4-55)
3) Removing the Left Rear Cover.(Refer to page 4-22)
4) Removing the ADF Unit + Reader Unit.(Refer to page 4-33)
5) Separate the ADF Unit + Reader Unit.(Refer to page 4-35)
6) Removing the Reader Unit Upper Cover .(Refer to page 4-46)
■
Procedure
1) Remove the Belt Pulley [1].
1 Claw [2]
•
4
Disassembly/Assembly > Document Exposure, Feed System > Removing the Reader Motor Unit > Procedure
2) Remove the Gear [1].
•
3) Remove the Shaft Retaining Plate [1].
[2]
[1]
•
F-4-106
F-4-106
1 Claw [2]
[2]
[1]
1 Screw [2]
[1]
[2]
4-51
F-4-107
F-4-107
F-4-108
F-4-108
4-51