Removing The Reader Motor Unit; Preparation; Procedure - Canon M3010 Series Service Manual

4
Disassembly/Assembly > Original Exposure System > Removing the Reader Motor Unit > Procedure

Removing the Reader Motor Unit

■ Preparation

1) Remove the Left Cover.(Refer to page 4-13)
2) Remove the Reader Unit.(Refer to page 4-20)
3) Remove the Cord Guide Cover [1] at the back side of the Reader Unit.
• 4 Claws [2]
• 1 Hook [3]
x4
4) Remove the Control Panel Unit.(Refer to page 4-29)
5) Remove the Copyboard Glass Unit.(Refer to page 4-21)
4 Disassembly/Assembly > Original Exposure System > Removing the Reader Motor Unit > Procedure
[2] [2]
[1]
[2] [3]
F-4-45

■ Procedure

CAUTION:
• Be sure not to lose the 2 spacers [1] of the CIS Unit when disassembling/
assembling.
• Be sure not to touch the document reading part [A] of the CIS Unit when
disassembling/assembling.
[1]
4-23
[A]
F-4-46
4-23