Single Mode Operation: Switching Principle - Barco iCon H600 Owner's Manual

8. Advanced
Image 8-46

Single mode operation: switching principle

Dual mode
Both lamps are working at the same time.
When one lamp fails, the projector continues the projection using the remaining lamp. Again the lamp error is logged and shown on
the screen.
How to select the lamp mode ?
1. Press MENU to activate the Tool bar
2. Press → to select the Lamp item
3. Press ↓ to Pull down the Lamp menu
4. Use ↑ or ↓ to select Mode
5. Press → to pull down the menu
6. Use ↑ or ↓ to select the desired mode
Image 8-47
7. Press ENTER
A bullet shows the active mode.
R5976821 BARCO ICON 15/03/2007 99