Configuration; Osd Color; Internal Patterns - Barco REALITY 8200LC R9001218 Owner's Manual

Configuration

ENTER
For more information, see Projector configuration in chapter 4 :
'Installation Set Up'.
OSD color (On-Screen Display)

Internal Patterns

The projector is equipped with different internal patterns which can be
used for measurment purposes.
Highlight "Internal Patterns" by pushing the control disk up or down
and press ENTER to display the Internal Pattern selection menu.
The following test pattern are available :
- Outline
- Color Bars
- Multiburst
- Checker Board
- Purity
- Page Char (one page with the same character)
- Alpha-numeric characters
Each pattern (except Purity) can be inverted by pressing ENTER.
For Page Char, the next or previous character can be selected by
pushing the control disk up or down.
To return to the normal pattern, press EXIT.
5975848A BARCOREALITY 8200LC 271197
ENTER
Installation Mode
INSTALLATION
INPUT SLOTS
800 PERIPHERALS
CONVERGENCE
CONFIGURATION

OSD COLOR

INTERNAL PATTERNS
Select with or
then <ENTER>
<EXIT> to return.
INSTALLATION
INPUT SLOTS
800 PERIPHERALS
CONVERGENCE
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
OSD COLOR
HIGHLIGHTED ITEM
RED
GREEN
YELLOW
Select with or
then <ENTER>
<EXIT> to return.
INSTALLATION
INPUT SLOTS
800 PERIPHERALS
CONVERGENCE
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
Select with or
then <ENTER>
<EXIT> to return.
INTERNAL PATTERNS
OUTLINE
COLOR BARS
MULTIBURST
CHECKER BOARD
PURITY
PAGE CHAR
ALPHA-NUMERIC CHARS
Select with or
then <ENTER>
<EXIT> to return.
9-5