Built-In Needle Threader - ELNA 3210 Instruction Manual

1
3

Built-in Needle Threader

Machine should remain switched OFF with needle in
highest position.
Lower the presser foot. Lower the needle
threader lever
automatically inserted into the needle eye.
2
Bring the thread around threader guide
2
hook .
2
Release the lever and let the needle threader return to its
original position.
Pull the thread loop to the back to manually bring the
thread through the needle eye.
• The needle threader can be used with #11 to #16
size needles. Thread weight may vary from 30 to 90.
NOTE: Needle threader cannot be used with a twin
needle.
40
1
as far as it will go. The hook
2
is
3
and under the