Replacing The Bobbin Holder And Needle Plate; Changing The Light Bulb - ELNA 3210 Instruction Manual

3
1
2
(A)
Wipe gently inside the hook area with soft, dry cloth. (You
can also use a small vacuum cleaner.)

Replacing the Bobbin Holder and Needle Plate

Insert the bobbin holder so the knob
stopper
2
1
Replace the needle plate and align the hook
the screws.
After cleaning, be sure to replace the needle, presser
3
foot and bobbin.

Changing the Light Bulb

The sewing light is located behind the face plate.
UNPLUG THE MACHINE.
Wait until the bulb is COOL before you touch it!
Remove screw cap
plate
Depending on model:
(A) To remove: pull out bulb from socket.
(B) To remove: Push up and twist to the left.
Attach face plate and insert screw and screw cap.
NOTE: Replace bulb with same type and rating, Model
3210: 15 W, Model 3230: 12V, 5W.
(B)
102
2
in the hook area.
1
, screw
3
.
To replace: insert bulb into socket.
To replace: Push up and twist to the right.
1
fits next to the
3
. Replace
2
and face