Avaya 9608 Installation And Maintenance Manual page 73

One-x series
Hide thumbs Also See for 9608:
Table of Contents

Advertisement

Message
IP Address
Error
License Error
Limit Error
NAPT Error
No Ethernet
Packet Error
Password Error
Request Error
Restarting...
Subnet
conflict * to
program
System busy
H.323 Installation & Maintenance Guide R6.1
RESOLUTION: Verify the proper filename is administered in the script
file, and that the proper application file is located in the appropriate
location on the HTTP/HTTPS server.
CAUSE: The gatekeeper reports an invalid IP Address.
RESOLUTION: This should never happen. Contact Avaya.
CAUSE: The call server does not support IP telephony.
RESOLUTION: Contact Avaya to upgrade your license.
CAUSE: The call server has reached its limit of IP stations.
RESOLUTION: Un-register telephones not in use, or contact Avaya
to upgrade your license.
CAUSE: A device between the telephone and the call server is
invoking Network Address Port Translation, which the 9600 Series IP
Deskphones do not support.
RESOLUTION: Contact the System Administrator to remove or re-
administer the device.
CAUSE: When first plugged in, the IP telephone is unable to
communicate with the Ethernet.
RESOLUTION: Verify the connection to the Ethernet jack, verify the
jack is Category 5, verify power is applied on the LAN to that jack,
etc.
CAUSE: Protocol timeout error.
RESOLUTION: Reenter the correct extension and password. If the
condition persists, contact the System Administrator.
CAUSE: The call server does not recognize the password entered and
displays the Login Error screen.
RESOLUTION: Confirm the password is correct, then try registration
again, taking particular care to enter the password accurately.
CAUSE: The gatekeeper believes the telephone's registration request
is improperly formatted.
RESOLUTION: The telephone will automatically attempt to register
with the next gatekeeper on its list. If the problem persists, reboot the
telephone.
CAUSE: The telephone is in the initial stage of rebooting.
RESOLUTION: Allow the telephone to continue.
CAUSE: The telephone is not on the same VLAN subnet as the
router.
RESOLUTION: Press * (asterisk) to administer an IP Address on the
telephone using
Changing IP address information
administer network equipment to administer the telephone
appropriately.
CAUSE: Most likely, the number of IP endpoints on the call server is
already at maximum, Less likely, network resource is unavailable.
Installation error and status messages
Cause/Resolution
on page 42, or
May 2011
73

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

9641g9621g9611g

Table of Contents