Avaya 9608 Installation And Maintenance Manual page 28

Installing the Deskphone
1. The system initialization value for the language file in use (NVLANGFILE) is
2. The boot programs check the Kernel/Root File System that has previously been
3. The internal clock/calendar is set to 0:00:00 Saturday, January 1, 2000 and
4. The telephone activates the Ethernet line interface, the PC Ethernet jack, and dial
28 H.323 Installation & Maintenance Guide R6.1
checked for a non-null value, in which case the text strings in that language file are
used for text display. Otherwise, English text strings are displayed.
marked as the one to be activated to ensure that it has not become corrupted, and
if it has not, transfers control to a process in that file system. If that file system is
corrupted, the boot program checks the other Kernel/Root File System. If that file
system is not corrupted, it is marked as the one to be activated, the value of
RFSINUSE is set to the name of the Signed Kernel/Root Software Package that
was used to install that file system, and control is transferred to it. If both Kernel/
Root File Systems are corrupted, processing halts. The software checks whether a
Signed Application/Library Software Package has been previously downloaded,
and if one is found, the Application Software Package and/or the Library Software
Package is installed if either has a different file name than the currently installed
version, replacing the existing corresponding files in the Application File System.
The downloaded Signed Application/Library Software Package is then deleted. If a
new Signed Application/Library Software Package is not found, the integrity of the
application files is checked. If they are corrupted, files from the Backup Package
are installed, replacing the corrupted files in the Application File System. Any time
an Application Software Package or a Library Software Package is installed, the
value of the persistent parameter APPINUSE is set to the file name of the
Application Software Package that was installed. If the application files are not
corrupted, or after the Backup Package has been installed, control is transferred to
the application installed in the Application File System. While loading the application
files into volatile memory and as control is transferred to them, the value of the
APPINUSE parameter is displayed on the bottom text line.
started.
pad input to allow the invocation of procedures. The activation occurs as soon as
possible after power-up or a reset.
The telephone displays the speed of the Ethernet interface in Mbps, that is, 10, 100,
or 1000. The message
determines whether the interface is 10 Mbps, 100 Mbps, or 1000Mbps.
Note:
The Ethernet speed indicated is the LAN interface speed for both the telephone
and any attached PC, assuming the administrator has not disabled the latter
interface by a PHY2STAT setting.
Important:
Pressing * (asterisk) whenever a "
the initialization process can support an interrupt invokes the Craft Access entry
procedure to allow manual settings, but only if the PROCSTAT (local dialpad
procedure status) system value is "0." The zero PROCSTAT value provides full
No Ethernet * to program
* to program
displays until the software
" message displays or whenever
May 2011