Avaya 9608 Installation And Maintenance Manual page 67

H.323 Installation & Maintenance Guide R6.1
Note:
Use the Right navigation arrow to scroll through the viewable information where
indicated in Table 2: Parameter Values
Table 2: Parameter Values
Name
Phone (IPv4) nnn.nnn.nnn.nnn
Phone (IPv6) hhhh:hhhh::hhhh:hhhh:hhhh
Phone (IPv6LL) hhhh:hhhh::hhhh:hhhh:hhhh
Call Server nnn.nnn.nnn.nnn
Supplicant ccccccccccccccccc
Pass-thru ccccccccccccccccc
Router (IPv4) nnn.nnn.nnn.nnn
Mask (IPv4) nnn.nnn.nnn.nnn
HTTP server nnn.nnn.nnn.nnn
HTTPS server nnn.nnn.nnn.nnn
802.1Q cccc
VLAN ID cccc
Using the VIEW craft procedure for troubleshooting
on page 67.
System Value Format
Deskphone IP Address;
IPADD value.
Deskphone IP Address;
NVIPADDV6 value.
Deskphone IP Address;
IPADDV6LL value.
IP Address of the call server
currently in use, otherwise
"0.0.0.0."
Text equivalent of
DOT1XSTAT: if 0, Disabled; if
1, Unicast-only; if 2, Unicast/
multicast.
Text equivalent of DOT1X; if
0, Enabled; if 1, Enabled w/
Logoff; if 2, Disabled.
Up to 15 ASCII characters:
the IP Address of the router
in use.
Up to 15 ASCII characters:
NETMASK value.
IP Address of last HTTP
server used successfully
during initialization or
"0.0.0.0" if no file server was
used successfully.
IP Address of last HTTPS
server used successfully
during initialization or
"0.0.0.0" if no file server was
used successfully.
Text string corresponding to
the L2Q value.
Up to 4 ASCII characters.
Value is L2QVLAN text
"Auto" if 802.1Q tagging is 0
May 2011 67