Avaya 9608 Installation And Maintenance Manual page 43

1. When you select ADDR from the Craft Local Procedure Screen, the Static
H.323 Installation & Maintenance Guide R6.1
Addressing Local Procedure screen displays as follows with the prompt
address to change.
Static Addressing
Field
Phone (IPv4)
Phone (IPv6)
Call Server
Router (IPv4)
Mask (IPv4)
HTTP Server
HTTPS Server
802.1Q
VLAN ID
VLAN Test
where:
• nnn.nnn.nnn.nnn is the current IP Address in IPv4 format associated with the
specific address information to its left, which could be either a value previously
set by a technician, or the original value of NVIPADD if no previous change
was made,
• hhhh:hhhh:hhhh:hhhh:hhhh is the current IP Address in IPv6 format
associated with the specific address information to its left, which could be either
a value previously set by a technician, or the original value of NVIPADD if no
previous change was made,
• L2Q text string is the text string associated with the current system value of
L2Q where "Auto" = an L2Q value of "0", "On" = an L2Q value of "1", and "Off"
= an L2Q value of "2", and
Field Value
nnn.nnn.nnn.nnn
hhhh:hhhh::hhhh:hhhh:hh
hh
nnn.nnn.nnn.nnn or
hhhh:hhhh::hhhh:hhhh:hh
hh
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn
nnn.nnn.nnn.nnn or
hhhh:hhhh::hhhh:hhhh:hh
hh
nnn.nnn.nnn.nnn or
hhhh:hhhh::hhhh:hhhh:hh
hh
L2Q text string
dddd
ddd
Changing IP address information
Description
Deskphone IP Address
(IPADD)
Deskphone IP Address
(NVIPADDV6)
Call Server in use; media
server IP Address
Router in use; gateway/
router IP Address
IP network mask
(NETMASK)
IP Address of HTTP File
Server in use
IP Address of HTTPS
(TLS) File Server in use
L2Q setting text
description
NVL2QVLAN
VLANTEST
May 2011
Select
43