224 Storage space and interior equipment ›
Multifunction holder
Overview
card
Storage tray
E
The multifunction holder can be removed or rotated.
Ceiling
Remove and insert
The blanket is in a bag that can be attached to one of
the following locations.
On the guide rods of the front headrests.
▶
In the storage pockets on the backs of the front
▶
seats.
On the operating lever for adjusting the second
▶
seat row in the longitudinal direction.
Display in rear centre console
Overview
Multifunction holder
Cup holder
A
Storage compart-
B
ment for storing the
cover of the 12-volt
power outlet
Storage compart-
C
ment for the vehicle
key
Storage compart-
D
ment for coins and
Set the temperature
A
Display
B
Tablet holder
Settings
Tilt and turn
Adjust size
Remove and insert
Fasten behind the headrests
›
Pull out the locking tab
and move the upper
part of the holder to
the desired position.
Set the minimum size of
the empty holder to
avoid noise while driving.
›
Place the open adapter
on the front guide rods
of the headrest and
clip in carefully.
›
Clip in the holder in the
adapter.