Panoramic Sliding Roof; Force Limiter Of The Power Windows; Window Convenience Operation; Operational Faults - Skoda Yeti Owner's Manual

Hide thumbs Also See for Yeti:
Table of Contents

Advertisement

Closing
Lightly press the appropriate button up and hold it until the window has moved
into the desired position.
Additionally, the window can be closed automatically (fully closed) by pulling
the button upwards to the stop. Renewed pressing of the button causes the
window to stop immediately.

Force limiter of the power windows

ä
First read and observe the introductory information and safety warn-
ings
on page 34.
The electrically operated power windows are fitted with a force limiter. It reduces
the risk of bruises or injuries when closing the windows.
If there is an obstacle, the closing process is stopped and the window goes down
by several centimetres.
If the obstacle prevents the window from being closed during the next 10 sec-
onds, the closing process is interrupted once again and the window goes down by
several centimetres.
If you attempt to close the window again within 10 seconds of the window being
moved down for the second time, even though the obstacle was not yet been re-
moved, the closing process is only stopped. During this time it is not possible to
automatically close the window. The force limiter is still switched on.
The force limiter is only switched off if you attempt to close the window again
within the next 10 seconds - the window will now close with full force!
If you wait longer than 10 seconds, the force limiter is switched on again.

Window convenience operation

ä
First read and observe the introductory information and safety warn-
ings
on page 34.
The electrically powered windows can be opened and closed as follows when un-
locking and locking the vehicle.
Opening
Press and hold the unlock button
Hold the key in the driver's lock in the unlock position.
Press and hold he central locking button in the area of the symbol .
36
Using the system
on the remote control key.
Closing
Press and hold the lock button
Hold the key in the driver's lock in the lock position.
Press and hold he central locking button in the area of the symbol .
You can interrupt the opening or closing process for the windows immediately by
Ð
releasing the key or the lock button.

Operational faults

ä
First read and observe the introductory information and safety warn-
ings
on page 34.
Electrically operated power windows do not operate
If the battery has been disconnected and then reconnected while the window
was opened, the electrically operated power windows do not operate. The system
must be activated. Proceed as follows in order to re-establish the function:
switch on the ignition;
pull the top edge of the button in the driver's door to close the window;
release the button;
pull the relevant button upwards again for approx. 3 seconds.
Operation in winter
In the winter, ice accumulating on the surface of the window may cause there to
be more resistance when closing the window. The window will stop and move
back several centimetres.
It is necessary to deactivate the force limiter to close the window
Ð

Panoramic sliding roof

Introductory information
The panoramic sliding roof with sun screen can only be operated with the rotary
switch when the ignition is switched on
has several positions.
The panoramic sliding roof or sun screen can still be opened, closed and tilted for
approx. 10 minutes after switching the ignition off. However, as soon as one of
the front doors is opened it is no longer possible to operate the panoramic sliding
roof and sun screen.
on the remote control key.
» page
» Fig. 20
on page 37. The control dial
Ð
36.
Ð
£

Advertisement

Table of Contents
loading

Table of Contents