1-1] Slot-Card Property - Ip Gateway - Panasonic KX-TDA50 Pc Programming Manual

3.19 [1-1] Slot—Card Property - IP Gateway
3.19 [1-1] Slot—Card Property - IP Gateway
The properties of the VoIP Gateway card can be specified.
En-bloc Dialing Setting
Selects the call dialing mode.
Default
Overlap
Value Range
En-bloc: The PBX sends all of the dialed digits at once after the extension user completes dialing. The PBX
recognizes the end of dialing when (1) # is dialed, if programmed, (2) a preprogrammed telephone number is
dialed, or (3) the inter-digit timer expires.
Overlap: The PBX sends dialed digits one at a time.
Maintenance Console Location
3.19 [1-1] Slot—Card Property - IP Gateway
Programming Manual References
4.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—
4.17 [2-9] System Options—Option 2—
KX-TDA200/KX-TDA600 only)
5.4 [3-1-4] Dialing Plan
Feature Manual References
13.1.23 Private Network Features—VoIP (Voice over Internet Protocol)
QSIG-CT
Enables a call to be transferred to a destination extension at another PBX in a QSIG network.
Default
Yes
Value Range
Yes, No
Maintenance Console Location
3.19 [1-1] Slot—Card Property - IP Gateway
Programming Manual References
None
184 PC Programming Manual
Dial—Extension Inter-digit
End of Dial Plan—[#] as End of Dial for en Bloc mode (KX-TDA100/
Document Version 2010-11