Utility-T1 Line Trace (Kx-Tda100/Kx-Tda200/Kx-Tda600 Only); Utility-Isdn/Qsig Protocol Trace; Utility-Digital Trunk Error Report (Kx-Tda100/Kx-Tda200/Kx-Tda600 Only) - Panasonic KX-TDA50 Pc Programming Manual

2.6.12 Utility—Digital Trunk Error Report (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.6.10 Utility—T1 Line Trace (KX-TDA100/KX-TDA200/
KX-TDA600 only)
Traces the sent and received signaling bits and dial numbers on the specified channel of the T1 line. This utility
is intended for use by dealers.
This option is only available at Installer level, and requires that the target T1 card be set to INS status.
To view T1 trace data
1.
From the Utility menu, select T1 Line Trace.
2.
From the Slot No drop-down list, select the target slot.
3.
From the CH No drop-down list, select the target channel.
4.
Click Start.
Trace information will be displayed. The information is automatically updated whenever the data being
monitored changes.
5.
Click Stop to end the trace.
6.
Select an option:
•
Click Capture to save the displayed trace information.
Information is saved as a text-format file.
•
Click Clear to erase the information.
2.6.11 Utility—ISDN/QSIG Protocol Trace
This utility collects protocol trace data from PRI or IP-GW cards, and displays it on the PC.
This option is only available at Installer level, and requires that the target PRI or IP-GW card be set to INS
status.
Protocol trace data is continually accumulated on ISDN and IP-GW cards, and 3 types of data can be
downloaded:
•
Real Time Trace (not available when connecting via LAN): Pseudo-real-time data is collected through data
polling at one-second intervals. The displayed information is updated beginning when the Start button is
clicked.
•
Accumulation Trace: Previously accumulated data is retrieved and displayed.
•
Error Accumulation Trace: Previously accumulated error data is retrieved and displayed. This trace shows
the data snapshot that is taken just before a card resets.
To view trace data
1.
From the Utility menu, select ISDN/QSIG Protocol Trace.
2.
From the Slot No drop-down list, select the target slot.
3.
From the Trace Data Type drop-down list, select the type of data to view.
4.
Click Start.
Trace information will be displayed.
5.
Select an option:
•
Click Capture to save the displayed trace information.
•
Click Clear to clear the screen display.
6.
Click Cancel to return to the main screen.
2.6.12 Utility—Digital Trunk Error Report (KX-TDA100/
KX-TDA200/KX-TDA600 only)
Displays accumulated information on various types of errors occurring on digital CO lines.
52 PC Programming Manual Document Version 2010-11