Panasonic KX-TDA50 Pc Programming Manual page 71

To change the status (INS/OUS) of a card (Interactive mode only)
1.
Move the mouse pointer over the card.
A menu will be shown under the mouse pointer.
2.
Select the desired status:
•
Click INS to set the card to in-service status.
•
Click OUS to set the card to out-of-service status.
To install an option card on an OPB3 card
1.
Move the mouse pointer over the card.
A menu will be shown under the mouse pointer.
2.
Select Option Card.
The OPB3 Option Card Setup screen will be displayed. See 3.29 [1-1] Slot—OPB3 Option Card Setup
(KX-TDA100/KX-TDA200/KX-TDA600 only).
Supported Card Types
KX-TDA50
Card
MPR: Main Processing Card
DHLC4: Pre-installed Super
Hybrid Ports
DLC4: 4-Port Digital Extension
Card
HLC4: 4-Port Hybrid Extension
Card
PLC4: 4-Port Proprietary
Extension Card
SLC4: 4-Port Single Line
Telephone Extension Card
LCOT4: 4-Port Analog Trunk Card
DLC8: 8-Port Digital Extension
Card
PLC8: 8-Port Proprietary
Extension Card
SLC8: 8-Port Single Line
Telephone Extension Card
IP-GW4: 4-Channel VoIP
Gateway Card
IP-EXT4: 4-Channel VoIP
Extension Card
SIP-GW4: 4-Channel SIP CO line
Card
Document Version 2010-11
Maximum Supported
Quantity Slot Numbers
1 00
1 01
1
02–04 (Type A
Slots)
3
2
05–07 (Type B
Slots)
1
1
1
Card Programming
3.3 [1-1] Slot—Card Property - MPR
3.4 [1-1] Slot—Card Property -
Extension Type
3.10 [1-1] Slot—Card Property -
LCO type
3.4 [1-1] Slot—Card Property -
Extension Type
3.19 [1-1] Slot—Card Property - IP
Gateway
3.22 [1-1] Slot—Card Property - IP
Extension
3.25 [1-1] Slot—Card Property - SIP
Gateway (KX-TDA50 only)
PC Programming Manual
3.1 [1-1] Slot
71