Extension Caller Id - Panasonic KX-TDA50 Pc Programming Manual

6.1 [4-1-1] Wired Extension—Extension Settings
Feature Manual References
None
Group CW w/o Tone (Ring after Call)
Enables an incoming call to an incoming call distribution group to arrive at a previously busy extension at the
moment that the extension goes on-hook for the previous call.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None

Extension Caller ID

Enables the extension to send Caller ID information to an SLT.
Note that for KX-TDA50, the setting of this parameter is only effective when a resource for sending extension
Caller ID is assigned in
Extension CID Settings.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
4.18 [2-10] Extension CID Settings—
Feature Manual References
3.1.1 Caller ID
520 PC Programming Manual
Extension Caller ID Resource-1, 2 (KX-TDA50 only) for the port in 4.18 [2-10]
Extension Caller ID Resource-1, 2 (KX-TDA50 only)
Document Version 2010-11