Panasonic KX-TDA50 Pc Programming Manual page 77

3.10 [1-1] Slot—Card Property - LCO type
3.13 [1-1] Slot—Card Property - PRI type (KX-TDA100/KX-TDA200/KX-TDA600 only)
3.16 [1-1] Slot—Card Property - T1 type (KX-TDA100/KX-TDA200/KX-TDA600 only)
3.19 [1-1] Slot—Card Property - IP Gateway
3.22 [1-1] Slot—Card Property - IP Extension
3.25 [1-1] Slot—Card Property - SIP Gateway (KX-TDA50 only)
3.27 [1-1] Slot—OPB3 Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
3.30 [1-1] Slot—Card Property - CTILINK (KX-TDA100/KX-TDA200/KX-TDA600 only)
3.31 [1-1] Slot—Card Property - DPH type (KX-TDA50 only)
3.33 [1-1] Slot—Card Property - ESVM Type (KX-TDA50 only)
Feature Manual References
None
Status
Indicates the card status (reference only).
Note that MPR card status is always displayed as "-".
Default
Slot 00: - (fixed)
Other slots: Current status
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Pre-Install: A card has been added to the slot.
Idle: No card is installed in the slot.
Maintenance Console Location
3.2 [1-1] Slot—Summary
Programming Manual References
3.1 [1-1] Slot
Feature Manual References
None
Version
Indicates the LPR version of the installed card (reference only).
For IP-EXT16 cards, both the LPR version and the VoIP version are displayed. The LPR version is shown on
the left, and the VoIP version on the right, as follows:
(Example) 1.002 / 1.001
For IP-EXT4 cards, only the VoIP version is displayed.
Default
Current version number
Document Version 2010-11
3.2 [1-1] Slot—Summary
PC Programming Manual 77