Panasonic KX-TDA50 Pc Programming Manual page 191

To change the value displayed here, click Common Settings, and set the desired value for
Address.
Default
0.0.0.0
Value Range
0.0.0.0–223.255.255.255
Maintenance Console Location
3.22 [1-1] Slot—Card Property - IP Extension
Programming Manual References
3.23 [1-1] Slot—Card Property - IP Extension—Common Settings
Feature Manual References
9.1.15 IP-PT (IP Proprietary Telephone)
Keep Alive Time Out
Specifies the length of time that the PBX will continue to consider an IP-PT to be active even if it receives no
transmissions from that IP-PT. The PBX constantly confirms the status of IP-PTs. If no communications are
received from an IP-PT for the duration specified here, the PBX considers the IP-PT to be unreachable, and
sets the port status to Fault.
During operation, set between 10 s and 60 s. Settings over 60 s, and Disable, are used for debugging purposes,
and IP-PTs cannot be guaranteed to function normally in these circumstances. Do not use debugging settings
unless instructed to do so.
Default
10 s
Value Range
Disable, 10–120 s
Maintenance Console Location
3.22 [1-1] Slot—Card Property - IP Extension
Programming Manual References
None
Feature Manual References
9.1.15 IP-PT (IP Proprietary Telephone)
Echo Canceller Ability
Specifies the echo canceler ability time.
Document Version 2010-11
3.22 [1-1] Slot—Card Property - IP Extension
PC Programming Manual
Gateway
191