Specifications; Models And Their Standard Specifications - Toshiba TOSVERT VF-AS1 Instruction Manual

12. Specifications

12.1

Models and their standard specifications

1) Standard specifications (Power supply is based on 500V)
Item
Voltage class
Applicable motor (kW) 1.5
Type
Form 5015PM 5022PM 5030PM 5040PM 5055PM 5075PM 6150PL 6185PL 6220PL 6300PL 6370PL 6450PL 6550PL 6750PL 6900PL
Output capacity (kVA)
2.8
[Note 1]
Output current
(A)
3.2
[Note 2]
Three-phase 500V~600V (The maximum output
Output voltage
voltage is equal to the input supply voltage.)
Overload current
rating
Dynamic braking
circuit
Dynamic braking
resistor
Voltage-frequency Three-phase 500~600V-50/60Hz [Note 3]
Allowable
fluctuation
Protective method
Cooling method
Cooling fan noise (dBA)
Color
Basic filter (Not complies with the European
EMC filter
Reactor
Item
Voltage class
Applicable motor (kW) 90
Type
Form 6110KPC
Output capacity (kVA)
118
[Note 1]
Output current
(A)
136
[Note 2]
Output voltage
Overload current
rating
Dynamic braking
Built-in dynamic braking drive circuit
circuit
Dynamic braking
resistor
Voltage-frequency
Allowable
fluctuation
Protective method
Cooling method
Cooling fan noise (dBA)
Color
EMC filter
Reactor
Note 1: Capacity is calculated at 500V for the 500V class.
Note 2: Rated output current when the PWM carrier frequency (parameter ) is 2.5kHz.
⇒ Refer to 1.4.4 "Current reduction curve" for details.
Note 3: An external power supply backup available (option) (Type: CPS002Z)
Note 4: ±10% when the inverter is used continuously (load of 100%).
Note 5: Inverters do not have wiring port covers. They have large openings, but there is no space to bend the
external cables inside the unit.
Note 6: AC reactor (option): Mandatory for VFAS1-6110KPC and above.
2.2 3.0 4.0 5.5 7.5
3.9 5.1 6.5 8.7 12
4.5 5.8 7.5 10 13.5
Built-in dynamic braking drive circuit
An external braking resistor (option)
Voltage + 10% - 15% [Note 4]
60
EMC Directive)
External AC reactor (option)
110 132
6132KPC 6160KPC 6200KPC
143 173
165 200
Three-phase 500V~690V (The maximum output voltage is equal to the input supply voltage.)
Three-phase 500~690V-50/60Hz [Note 3]
Voltage + 10% - 15% [Note 4]
73
[Note 6] External AC reactor (option)
Specification
500V class
11 15 18.5 22
VFAS1-
17 21 26 31
18.5 24 29 35
Three-phase 500V~690V (The maximum output voltage is equal
to the input supply voltage.)
150%-1 minute, 165%-2 sec.
⇒
Rating: Refer to 5.19.
Three-phase 500~690V-50/60Hz [Note 3]
Frequency ±5%
IP20 Enclosed type
Forced air-cooled
RAL7016
Built-in DC reactor
Specification
500V class
160 200 250
VFAS1-
6250KPC 6315KPC
208 270 295
240 312 390
150%-1 minute, 165%-2 sec.
External dynamic braking circuit(option)
An external braking resistor (option)
⇒
Rating: Refer to 5.19.
Frequency ±5%
IP00 Open type [Note 5]
Forced air-cooled
76
RAL7016
Built-in
L-1
E6581528
30 37 45 55
41 52 59 74
47 59 68 85
64
Built-in
315 400 500
6400KPC 6500KPC 6630KPC
400 511 641
462 590 740
78
75
90
104
12