Connector Panel - Sony PDW-HR1 Operation Manual

Connector Panel

7 (i.LINK) HDV TS connector
a -AC IN connector
Connect to an AC power supply with the specified power
cord (not supplied) (see page 189).
b POWER (main power) switch
Press the : side to power on the unit. Press the a side to
power off.
38
Connector Panel
1 -AC IN connector
2 POWER switch
3 ANALOG AUDIO INPUT 1 to 4 connectors
4 MIC POWER (+48V) 1, 2 switches
qj
qh HDMI OUT connector
qg MAINTENANCE connectors
qf DVB-ASI OUTPUT connector qf DVB-ASI OUTPUT
qd SDSDI OUTPUT connector
qs REMOTE(9P) connector
qa HDSDI OUTPUT 1, 2 (SUPER) connectors
q; SD/HDSDI INPUT connector
9 REMOTE connector
(i.LINK) S400 FAM connector
8
5 ANALOG AUDIO OUTPUT 1 5 ANALOG AUDIO OUTPUT 1 to 4 connectors
wa REF. VIDEO IN connector wa REF. VIDEO IN
w; REF. VIDEO OUT w; REF. VIDEO OUT connector
ql TIME CODE IN/OUT connectors
qk COMPOSITE IN/OUT connectors
(network) connector
When using the unit, normally leave the POWER switch in
the : (on) position, and use the on/standby (+/1) switch on
the control panel to switch the unit between the operating
state and standby state.
6 DC IN 12V connector