Return Button; Expand Button - Sony PDW-HR1 Operation Manual

on, when you want to perform a thumbnail search or create
a clip list from a GUI screen. Press it again, turning it off,
to return to full-screen display.
When pressed together with the SHIFT button, displays
essence mark frames (frames where essence marks have
been set). The essence mark selection menu appears.
Select the desired essence mark to display frames where
that essence mark has been set. Press the button again to
turn it off and return to full-screen display.
See "GUI screen operations" (page 78) for more
information about operations in the GUI screens.
h CHAPTER button
When pressed in a thumbnail screen, displays a list of
frames where essence marks are recorded (chapter
function). When pressed again, returns to normal
thumbnail display. Instead of index pictures, this function
displays thumbnails of the frames where essence marks are
set, allowing you to gain a quick overview of the clip. This
is also convenient for cuing up long clips.
See page 81 for more information about the chapter
function.
i RETURN button
In setup menu and GUI screen operations, returns to the
previous step of a setting or procedure.
j EXPAND button
When pressed in a thumbnail screen, divides the selected
clip into 12 blocks and displays a list of thumbnails of the
first frame in each block (expand function). The division is
repeated with each press (up to 3 times, for a total of 1,728
blocks).
When this button is pressed together with the SHIFT
button, the unit returns to the previous division level.
Press the RESET button to return to the thumbnail screen.
See page 80 for more information about the expand
function.
k SET button
When pressed in a setup menu or GUI screen operation,
confirms the current settings.
l B button and b button
When the THUMBNAIL/ESSENCE MARK button is lit,
you can use these buttons to select clips.
m SHIFT button
Switches between functions for any button with two
functions.
n V/MARK1 button and v/MARK2 button
When the THUMBNAIL/ESSENCE MARK button is lit,
you can use these buttons to select thumbnails.
During recording or playback, a shot mark 1 or shot mark
2 essence mark is recorded when you press the PUSH SET
knob or the SET button with the V/MARK1 or v/MARK2
button held down.
Essence marks can also be deleted and modified from the
Thumbnail Menu of the chapter thumbnail screen (see
page 74).
3 Recording and playback control section
1 REC INHI indicator
2 REC button
5 PLAY button
4 PREV button
a REC INHI (recording inhibit) indicator
This lights in the following cases.
• When a disc with recording inhibited is loaded.
• When REC INH on the HOME page of the function
menu is set to "ON".
• The format of the recorded part of the disc does not
match the system frequency settings of the unit.
b REC (record) button
To start recording, hold down this button, and press the
PLAY button. The recording takes place on an unrecorded
part of the disc.
To stop recording, press the STOP button.
To monitor in E-E mode
You can press this button from stop mode to monitor input
signals in E-E mode. The button lights when pressed. Press
the STOP button to return to the original video.
You can also press this button during playback and
searches. E-E mode playback continues for as long as the
button is held down.
c PAUSE button
Press this button, turning it on, to pause recording or
playback.
3 PAUSE button
8 STOP button
7 STANDBY indicator
6 NEXT button
Control Panel
25