Video Monitor Display - Sony PDW-HR1 Operation Manual

Video monitor display

a Waveform monitor/Vectorscope
You can display a basic waveform monitor or a basic
vectorscope by switching the setting of the "MODE"
subitem of WFM in the P1 VIDEO page of the function
menu (see page 57).
You can use the waveform monitor or vectorscope to
check video signal characteristics, or to display color bars
and then adjust video process settings (video signal output
levels, chroma signal output levels, hue) (see page 28).
Not displayed
1 Waveform monitor
2 75% color bar signal vectorscope
3 100% color bar signal vectorscope
Video monitor
3 Memory card loaded indication and remaining recording capacity
2 Audio level meters
1 Waveform monitor/Vectorscope
5 Time data display
4 Disc loaded indication and remaining recording capacity
b Audio level meters
Displays basic audio level meters.
c Memory card indication mark and remaining
recording capacity
Indicate whether a memory card is loaded, and the
remaining recording capacity (see page 36).
d Disc loaded indication and remaining recording
capacity
A disc loaded indication and a remaining recording
capacity appear when a disc is loaded in this unit.
e Time data display
Displays the time data (see page 36).
f Power status
Displays the status of power supply to the unit (see
page 32).
6 Power status
Display Panel
37