Sony PDW-HR1 Operation Manual page 160

Item number Item name
843 AUDIO OUTPUT ARRANGE
Item number Item name
920 SD-SDI H-ANC CONTROL
Sub-item
1 AUDIO 5CH-8CH
2 RP188 ATC
923 AUTO SQUEEZE
925 HDMI OUTPUT SELECT
930 DOWN CONVERTER MODE
931 DOWN CONVERTER LETTER BOX
MODE
932 H CROP POSITION (DC)
934 CROSS COLOR (DC)
935 DETAIL GAIN (DC)
936 LIMITER (DC)
937 CRISP (DC)
938 LEVEL DEPEND THRESHOLD
(DC)
939 H DETAIL FREQUENCY (DC)
940 H/V RATIO (DC)
160
Setup Menu
Menu items in the 800s, relating to audio control (AUDIO CONTROL)
Settings
This appears when the PDBZ-UPG03 Software Upgrade Key or PDBK-
MK1 option board is installed.
See "To set up mixing of audio/voice data output signals" (page 122) for
more information about how to set up mixing.
Menu items in the 900s, relating to digital process (DIGITAL PROCESS)
Settings
Select whether to add information to the SDI output.
off: Do not add digital audio data channels 5 to 8.
on: Add digital audio data channels 5 to 8.
off: Do not add RP188 timecode data.
on: Add RP188 timecode data.
Select whether to use auto squeeze mode.
off: Do not use.
on: Use.
Select the resolution of the video output from the HDMI OUT connector.
hd (1080i/720P)
sd-I (480i (576i))
sd-p (480P (576P))
Select the down-converter mode.
CROP (EDGE CROP): Select the edge-crop mode.
L-BOX (LETTER BOX): Select the letter box mode.
SQUEZ (SQUEEZE): Select the squeeze mode.
Select the aspect ratio of the down-converter output when menu item 930
is set to "l-box".
16:9: Set the aspect ratio of the HD-SD converter output to 16:9.
14:9: Set the aspect ratio of the HD-SD converter output to 14:9.
13:9: Set the aspect ratio of the HD-SD converter output to 13:9.
Adjust the H-crop (the horizontal position when cropping in the edge crop
mode) of the down converter output when menu item 930 is set to "crop".
–120 (–120 (DEC)) to 0 (0 (DEC)) to 120 (120 (DEC))
Adjust the down-converter cross color.
0 (0 (DEC)) to 8 (8 (DEC)) to 15 (15 (DEC))
Adjust the down-converter image enhancer, the sharpness of edge
enhancement.
0 (0 (HEX)) to 7F (7F (HEX))
Adjust the down-converter image enhancer, the maximum detail level
added to emphasize the original signal.
0 (0 (HEX)) to 20 (20 (HEX)) to 3F (3F (HEX))
Adjust the down-converter image enhancer, the threshold amplitude at
which low amplitude signals are not emphasized.
0 (0 (HEX)) to F (F (HEX))
Adjust the down-converter image enhancer. Set the luminance range for
edge enhancement.
0 (0 (HEX)) to 8 (8 (HEX)) to F (F (HEX))
Adjust the down-converter image enhancer. Set the central frequency for
edge enhancement.
2.6M (2.6 (MHz)), 3.4M (3.4 (MHz)), 3.9M (3.9 (MHz)), 4.6M (4.6 (MHz))
Adjust the down-converter image enhancer. Set the horizontal/vertical
ratio for edge enhancement.
0 (0 (DEC)) to 3 (3 (DEC)) to 7 (7 (DEC))
Specify the mixing of audio/voice data output signals.
Note