Sony PDW-HR1 Operation Manual page 92

Add Sub Clip
TC 00:30:25:11 TC 00:30:40:13
TC 00:24:24:29 TC 00:24:34:27
Scene Selection
To display the total duration after addition of the
selected clip
Press the SHIFT button.
4
In the Scene Selection window, move the I cursor to
the location where you want to insert the clip. (The
existing thumbnails arrange themselves to the left and
right of the I cursor.)
5
Press the PUSH SET knob.
The selected clip is inserted as a sub clip and a "+"
mark appears on the thumbnail in the Scene Selection
window.
To check the addition results
Move the cursor.
6
Press the RETURN button.
This returns you to the Clip thumbnail screen.
7
Repeat steps 1 to 6 as required to add more clips.
8
Save the clip list (see page 95).
In step 1, you can press the S.SEL button. This is a shortcut
that displays the Add Sub Clip screen immediately. You
can also save the clip list immediately in step 5 by
executing the Save Clip List command in the Disc Menu.
Adding sub clips from the clip list thumbnail
screen
See page 78 for more information about thumbnail screen
operations.
1
Display the Thumbnail Menu.
2
Select Add Sub Clips, and then press the PUSH SET
knob.
The Clip List (Add) screen appears.
92
Scene Selection (Clip List Editing)
002 017/035
TC 01:01:28:25 TC 00:09:43:14
TC 00:24:46:22 TC 00:24:56:24
00:13:48:24
TOTAL
Clip List (Add)
TC 00:30:25:11 TC 00:30:40:13
TC 00:24:24:29 TC 00:24:34:27
Scene Selection
3
Select the sub clips that you want to add from the
upper part of the screen (the part where 8 thumbnails
are displayed, multiple selections possible).
To select from expanded thumbnails
Press the EXPAND button to display the expand
thumbnail screen.
To select from chapter thumbnails
Press the CHAPTER button to display the chapter
thumbnail screen.
4
Press the PUSH SET knob.
The thumbnail selection is confirmed, and an I cursor
appears at the bottom of the Clip List (Add) screen (in
the Scene Selection window). The I cursor indicates
the location where the currently selected sub clips will
be inserted.
To display the total duration after addition of the
selected clips
Press the SHIFT button.
5
In the Scene Selection window, move the I cursor to
the location where you want to insert the clip. (The
existing thumbnails arrange themselves to the left and
right of the I cursor.)
6
Press the PUSH SET knob.
The sub clips are added at the I cursor position, and
you return to the clip list thumbnail screen.
You can check the results of the addition in that screen.
7
Repeat steps 1 to 6 as required to add more clips.
8
Save the clip list (see page 95).
In step 1, you can also perform a shortcut operation by
pressing the S.SEL button.
002 017/035
TC 01:01:28:25 TC 00:09:43:14
TC 00:24:46:22 TC 00:24:56:24
00:13:48:24
TOTAL