Synchronization Reference Signals - Sony PDW-HR1 Operation Manual

Synchronization Reference Signals

The synchronization reference signal generator of this unit
synchronizes to a reference signal input to the REF.
VIDEO IN connector or to a video input signal. External
synchronization is as follows, depending on the setting of
Input to SD/HDSDI
INPUT or COMPOSITE
a)
IN connector
Yes
Yes
No
No
a) When V INPUT on page P1 VIDEO of the function menu is set to "SG"
and OUT REF is set to "INPUT", synchronize to the internal reference
signal of this unit.
b) During FAM or FTP connections, always synchronize to the internal
synchronization reference signal, regardless of the setting of OUT REF.
c) When setup menu item 308 SELECTION OF STD/NON-STD FOR
COMPOSITE VIDEO IN is set to "N-STD", always synchronize to the
internal synchronization reference signal.
50
Synchronization Reference Signals
Input to REF. VIDEO IN
connector
Yes
No
Yes
No
OUT REF on page P1 VIDEO of the function menu, and
on the type of the selected input signal. Video output
signals are always synchronized to the internal
synchronization signal.
Setting of OUT REF on page P1 VIDEO
REF
Synchronize to the signal input to
the REF. VIDEO IN connector
Synchronize to the signal input to the SD/HDSDI INPUT or
c)
COMPOSITE IN connector
Synchronize to the signal input to the REF. VIDEO IN connector
No external synchronization is made
b)
INPUT
Synchronize to the signal input to
the SD/HDSDI INPUT or
c)
COMPOSITE IN connector