Sony PDW-HR1 Operation Manual page 166

Item
M3B: VANC RX M3B0: VANC RX
PARAMETER PACKET
Sub-item
1
2
3
M3B1: LINE1 SEL
M3B2: LINE2 SEL
M3C: BATTERY M3C0: SETUP BATTERY
CONFIG END
M3C1: STATUS DISPLAY
M3C2: INFORMATION
M3D: DATE/TIME PRESET
M3E: USB MEMORY UTIL
M3F: FACTORY SETUP
Item
M40: EXTEND MENU
M41: CUSTOMIZE
166
Maintenance Menu
M3: OTHERS: Other setting items
Setting
For setting HDSDI VANC data input parameters
Notes
• In 59.94i, 50i, 29.97P or 25P mode, selecting the line also selects the
corresponding line in the second field (for example, if line 9 is selected, line 572
is also selected for VANC packet reception).
• Menu item M3B0 enables recording of one VANC packet when the selected line
contains any packets whose DID/SDID matches the value set with this menu
item.
• Up to four packets are recorded per each line regardless of the DID and SDID
for the VANC set with menu item M3B1 or M3B2.
• It is not possible to set the same line with menu items M3B0, M3B1, and M3B2.
If the same line is specified, priority is given in the order of M3B0, M3B1, and
M3B2 (for example, if the same line is specified with M3B0 and M3B1, the
setting with M3B1 is ignored).
• When VANC data is output to HDSDI playback signals, the number of the
output VANC line is the same as that of the input VANC line.
• When a UMID or essence mark line is selected with M3B1 or M3B2, UMID or
essence mark output takes priority. To disable UMID or essence mark output,
set setup menu item 651 or 657 to "off".
LINE Selects the lines for the VANC to be received.
OFF, 9LINE to 20LINE (59.94i/50i/29.97P/25P/23.98P mode)
OFF, 9LINE to 25LINE (59.94P/50P mode)
DID Specification of the DID of the VANC to receive
00-FF
SDID Specification of the SDID of the VANC to receive
00-FF
Selects the lines to be received for the HDSDI VANC data.
OFF, 9LINE to 20LINE (59.94i/50i/29.97P/25P/23.98P mode)
OFF, 9LINE to 25LINE (59.94P/50P mode)
Selects the lines to be received for the HDSDI VANC data.
OFF, 9LINE to 20LINE (59.94i/50i/29.97P/25P/23.98P mode)
OFF, 9LINE to 25LINE (59.94P/50P mode)
For details, refer to the Maintenance Manual.
Specifies the year, month, day, time, and time zone.
For installation of software upgrade
For details, refer to the Maintenance Manual.
For details, refer to the Maintenance Manual.
M4: SETUP MAINTENANCE: Items relating to the setup menu
Setting
Select whether to display the extended menu.
DISABLE: Do not display.
ENABLE: Display.
Select whether to enable the customization function of the setup menu.
DISABLE: Do not display.
ENABLE: Display.