Sony PDW-HR1 Operation Manual page 184

Alarm message in GUI screen
AUTOEDIT WAS NOT COMPLETED.
PREVIEW WAS NOT COMPLETED.
UNDO CAN NOT BE EXECUTED.
UNDO WAS NOT COMPLETED.
CLIPLIST CANNOT BE RE-EDITED
WITH S.SEL MODE. USE EDIT MODE.
CLIP CANNOT BE EDITED.
CAN NOT EDIT WITH DOWNCONVERT
MODE.
CLIP WITH OVERLAPPING VOICE
CANNOT BE EDITED.
EXPAND IS INVALID.
VOICE EDIT IS INVALID FOR MIXED
FORMAT CLIPLIST.
SPLIT EDIT IS INVALID FOR MIXED
FORMAT CLIPLIST.
VOICE DURATION IS MORE THAN 3
MINUTES.
MORE THAN 100 VOICE CLIPS
CANNOT BE REGISTERED IN ONE
CLIPLIST.
VOICE CLIP CANNOT BE RECORDED
ANY MORE.
VIDEO RESOLUTION DIFFER FROM IT
ON CLIP LIST.
SET SAME AUDIO RECORDING
FORMAT AS CLIPLIST.
184
Troubleshooting
Description/action
An auto edit failed for a reason other than those described above.
This appears when the specifications of this unit are exceeded. For example, the
specifications do not allow more than 300 clips to be recorded on one disc, and do
not allow the total duration of sub clips to exceed 24 hours. Check these items to
make sure that you are within the specified limits, and try the editing operation
again.
A preview failed for a reason other than those described above.
This appears when the specifications of this unit are exceeded. For example, the
specifications do not allow more than 300 clips to be recorded on one disc, and do
not allow the total duration of sub clips to exceed 24 hours. Check these items to
make sure that you are within the specified limits, and try the editing operation
again.
The operation that you attempted to undo cannot be undone.
This appears when you press the UNDO button after an operation that cannot be
undone, or when you press the UNDO button twice in succession.
An undo operation failed.
This appears when you press the UNDO button to undo an operation, and the undo
fails.
An attempt was made to execute scene selection on a clip list after executing an
audio voice-over or audio split edit on that clip list.
To edit that clip list, switch to EDIT LIST screen and perform edit list editing.
An attempt was made to edit a sub clip that consists of voice data only, without
video and audio data.
That sub clip cannot be edited.
An attempt was made to edit a clip that cannot be edited.
That clip cannot be edited.
An attempt was made to perform editing when the unit is in the down-converter
mode.
In the Clip List (Trim) screen, an attempt was made to change the In point of a sub
clip with overlapping voice-over.
Use the EDIT LIST screen to change the In point of that clip.
An attempt was made to expand the display of a sub clip containing only voice
data, without video and audio data.
The display of that sub clip cannot be expanded.
An attempt was made to perform voice-over editing on a clip list that contained sub
clips with different recording formats, or on a clip list that contained non-audio
signals.
Voice-over editing cannot be performed on that clip list.
An attempt was made to perform audio split editing on a mixed format clip list,
containing sub clips with different recording formats.
Audio split editing cannot be performed on that clip list.
In a Voice Over Video First editing operation, an attempt was made to set the
duration of voice data to longer than three minutes.
In Voice Over Video First editing operations, set the duration of the voice data to
three minutes or less.
An attempt was made to execute voice-over editing on a clip list that already
contains the maximum 99 voice-over sub clips (specifications of this unit).
No further voice-over editing is possible for that clip list.
As a result of editing operations, the number of voice-over sub clips exceeded the
maximum of 99 (specifications of this unit).
Redo the edit so that the number of voice-over sub clips falls within the range
allowed by the specifications.
An attempt was made to perform editing on an edit list with a video resolution and a
recording format that differ from those of this unit.
An attempt was made to perform voice-over editing on an edit list that contained
audio in a different recording format, or on an edit list that contained non-audio
signals.
Change the audio recording format to match the audio format of the edit list (see
page 165).