Checking User-Defined Essence Marks; Formatting Discs - Sony PDW-HR1 Operation Manual

When a b or B mark is displayed for an item, you can
press the B or b button to scroll the display by one
character for each press.
The V/MARK1 and v/MARK2 buttons scroll the
beginning and end of the string into view.
To return to the previous screen
Press the PUSH SET knob.
To clear planning metadata
See page 78 for more information about GUI screen
operations.
1
Display the Disc Menu.
2
Select Clear Planning Metadata, and then press the
PUSH SET knob.
A message appears asking if you are sure that you want
to clear the planning metadata.
3
Select OK, and then press the PUSH SET knob.
The planning metadata is cleared from this unit's
memory.
To switch the title display in the display
screen
When planning metadata is loaded into this unit, you can
select the format of the title to display in the display screen.
See page 78 for more information about GUI information.
1
Display the Disc Menu.
2
Select Settings, and then press the PUSH SET knob.
3
Select Planning Clip Name in Clip Info. Area and then
press the PUSH SET knob.
See page 32 for more information about the clip
information area.
4
Select one of the following, and then press the PUSH
SET knob.
Off: Do not display a title.
ASCII Clip Name: Display the ASCII format title
(see page 171)
Clip Name: Display the UTF-8 format title (see
page 171)
Checking user-defined essence
marks
You can display the names of user-defined Shot Mark0 to
Shot Mark9 essence marks in planning metadata (UTF-8
format, maximum 32 bytes).
1
Display the Planning Metadata Properties screen (see
page 98) for the planning metadata loaded into this
unit.
The , button is enabled when the planning metadata
contains user-defined essence marks (see page 172).
2
Press ,, and then turn the PUSH SET(S.SEL) knob.
The User Defined Essence Marks screen appears.

Formatting discs

See page 78 for more information about GUI screen
operations.
1
Display the Disc Menu.
2
Select Format Disc, and then press the PUSH SET
knob.
A message appears asking you to confirm the format.
Format Disc
All Clips, Clip Lists and
Non-AV Data (General Files)
will be Deleted.
Format OK?
3
Select OK, and then press the PUSH SET knob.
To cancel the format
Select Cancel, and then press the PUSH SET knob.
OK
Cancel
99
Disc Operations