Playback Operations Using Thumbnails - Sony PDW-HR1 Operation Manual

Playback in variable-speed mode
In variable-speed mode, you can control the speed of
playback in the range of –1 to +1 times normal speed. (You
can use setup menu item 119 VARIABLE SPEED LIMIT
IN KEY to specify the speed range of variable playback.)
To carry out playback in variable-speed mode, proceed as
follows.
JOG indicator: Unlit
1
Press the shuttle/jog dial to turn off the JOG indicator.
The shuttle/jog dial enters shuttle mode.
2
Press the VAR/JOG button, turning it on.
3
Turn the shuttle/jog dial to the desired angle
corresponding to the desired playback speed.
Playback in variable-speed mode starts.
4
To stop playback in variable-speed mode, return the
shuttle/jog dial to the center position, or press the
STOP button.
To alternate between normal-speed playback and
variable-speed mode playback
Set the shuttle/jog dial to the position corresponding to the
desired variable playback speed, then switch between
normal-speed playback and variable-speed mode playback
by pressing the PLAY and VAR/JOG buttons alternately.
Playback operations using
thumbnails
Playback operations that you can perform with thumbnails
include searching for clips, displaying clip information,
playing clip lists created with the scene selection function,
70
Playback
and locking and deleting clip. This allows you to check the
actual video as you work.
See "Thumbnail Operations" (page 79) for more
information about thumbnail operations, and "Scene
Selection (Clip List Editing)" (page 90) for more
information about the scene selection function.