Sony PDW-HR1 Operation Manual page 35

1) The indication and the menu items appear only when the PDBZ-UPG03
Software Upgrade Key or the PDBK-MK1 option board has been
installed.
h Level bars
Display the audio recording or playback levels of channels
1 to 8. The OVER indicators light when the audio level
exceeds 0 dB.
i Meter display mode
Displays the audio level meter display mode selected with
AU METER on page P2 AUDIO of the function menu (see
page 59).
3 Video information
1 Input signal
2 HDSDI output conversion display
6 SDSDI output conversion display
5 Format conversion display
a Input signal
Displays the currently selected video input signal.
HD-SDI: HDSDI video signal
SD-SDI: SDSDI video signal
COMPOSITE: Composite video signal (when setup
menu item 308 is set to "STD")
COMPOSITE(NSTD): Composite video signal (when
setup menu item 308 is set to "N-STD")
i.LINK: i.LINK TS (HDV) signal
DVB-ASI: DVB-ASI TS signal
SG: Test video signal generated by the internal signal
generator
1)When the PDBK-202 option board is installed
Note
The display flashes when there is no video input signal,
and when the video input signal does not match the system
frequency of this unit.
Select the video input signal with V INPUT on page P1
VIDEO of the function menu (see page 57).
b HDSDI output conversion display
When an upconverted or cross converted signal is being
supplied to the HDSDI OUTPUT 1 and 2 (SUPER)
3 Source selection
4 Reference signal
7 HDMI output
display
1)
1)
connectors, displays the formats before and after
conversion and the conversion mode.
SQ: Squeeze mode
EC: Edge-crop mode
LB: Letter box mode
c Source selection
The video monitor displays the video output that is
selected with the "SOURCE" sub-item of LCD MODE on
the P1 VIDEO page of the function menu. "LCD" appears
here in the display area of the selected output.
d Reference signal
Displays the reference signal to which this unit is
synchronized.
INPUT: Input video signal
HD-REF: HD format reference signal
SD-REF: SD format reference signal
No display: Internal reference signal
Note
The HD-REF or SD-REF display flashes if the video input
signal is not synchronized with the reference signal, or if
the signals are synchronized but out of phase.
e Format conversion display
When up-conversion or down-conversion is being
performed before recording, displays the formats before
and after conversion and the conversion mode.
SQ: Squeeze mode
EC: Edge-crop mode
LB: Letter box mode
f SDSDI output conversion display
When a downconverted signal is being supplied to the
SDSDI OUTPUT connector, displays the formats before
and after conversion and the conversion mode.
SQ: Squeeze mode
EC: Edge-crop mode
LB: Letter box mode
g HDMI output display
Displays the signal output to the HDMI OUT connector.
1080i: 1080/59.94i or 1080/50i signal
720P: 720/59.94P or 720/50P signal
480i: 480/59.94i signal
576i: 576/50i signal
480P: 480/59.94P signal
576P: 576/50P signal
35
Display Panel