Display Screen - Sony PDW-HR1 Operation Manual

h DISPLAY button
With each press, switches the display between the basic
operating screen and the video monitor.
i BACKLIGHT switch
Selects the brightness of the display backlight.
H: High
L: Low
OFF: Off (nothing displayed)
j KEY INHI (inhibit key operations) indicator
Lights when the KEY INHI switch is on and either the
AUDIO/F-KEY item or the CONTROL PANEL item
under setup menu item 118 KEY INHIBIT is set to "dis".

Display screen

Basic operation display
1 Function menu
4 Clip information
a Function menu
Use the BPAGE, PAGEb, and HOME buttons to display
this menu and to switch between the pages (HOME, P1 to
P4). Each page has items corresponding to the function
k WARNING indicator
Lights when the unit detects a hardware error such as
condensation inside the unit or a laser diode error. Goes
out when the error condition is corrected. When this
indicator lights, an error message appears in the time data
display area.
For details, see "Alarms" (page 177) and "Error
messages" (page 186).
Video monitor
2 Remaining memory capacity
3 Video information (see page 35)
2 Audio input display/Audio level meters (see page 34)
buttons. To change a setting, press the function button in
that position.
For details, see "Basic Function Menu Operations"
(page 56).
3 Recording format
1 System information (see page 32)
4 Time data display area (see page 36)
31
Display Panel