Error Messages - Sony PDW-HR1 Operation Manual

Alarm message in time
data display area
Unknown USB
Alarms related to system frequency and recording format
The following alarms are displayed only when setup menu
item 016 ALARM DISPLAY is set to "on" or "limit".
Alarm message in time
data display area
1080/59.94i
1080/29.97P
1080/50i
1080/25P
1080/23.98P
720/59.94P
720/50P
525/59.94i
625/50i
1080/59.94i
1080/50i
1080/29.97P
1080/25P
1080/23.98P
720/59.94P
720/50P
HD422 1080
HD422 720
HD420 1080
HD420 720
IMX50 Clip
IMX40 Clip
IMX30 Clip
8CH×16 Clip
4CH×24 Clip
2CH×16 Clip

Error messages

Error codes appear in the time data display when an error
(usually a hardware problem) occurs. In addition, both
error messages and error codes appear in the video monitor
screen and on the video monitor connected to the unit.
When an error message appears, follow the instructions in
the error message to resolve the problem.
186
Troubleshooting
Alarm message in video monitor screen Action
UNKNOWN USB DEVICE.
Alarm message in video monitor screen Action
RECORDING AND PLAYBACK IS NOT
POSSIBLE.
SYSTEM FREQUENCY SELECTION
DIFFER FROM IT ON DISC.
DISC CANNOT BE RECORDED.
VIDEO RESOLUTION DIFFER FROM IT
ON DISC.
DISC CANNOT BE RECORDED.
VIDEO REC MODE SELECTION
DIFFERENT FROM VIDEO ON DISC.
DISC CANNOT BE RECORDED.
AUDIO REC MODE SELECTION
DIFFERENT FROM AUDIO ON DISC.
The USB connector of this unit is for maintenance
purposes and connection of USB devices. Connect a
compatible USB device.
This appears when the system frequency selection of
the unit differs from that of the loaded disc.Insert a
disc with the same system frequency as the unit, or
change the unit's system frequency.
This appears when the number of system lines set in
this unit does not correspond to the resolution for the
inserted disc.
Change the disc to the one corresponding to the
number of system lines set in this unit or change the
number of system lines of this unit.
This appears when the video recording format of this
unit does not correspond to that of the inserted disc.
Change the disc to the one corresponding to the
video recording format of this unit or change the video
recording format of this unit.
This appears when the audio recording format of this
unit does not correspond to that of the inserted disc.
Change the disc to the one corresponding to the
audio recording format of this unit or change the
audio recording format of this unit.