Sony PDW-HR1 Operation Manual page 81

Using the chapter function to find scenes
Sections between shot marks and Rec Start are called
chapters.
Rec Start essence marks are set automatically at the start of
recording, but shot marks can be set at any scene during
recording or playback.
The chapter function allows you to display thumbnails of
the chapters in a clip.
See "To set shot marks" (page 63) for more information.
See page 78 for more information about thumbnail screen
operations.
1
In the clip thumbnail screen, select the thumbnail of a
clip with chapters set.
The "S" mark appears on the thumbnails of clips with
chapters set.
2
Press the CHAPTER button.
The chapter thumbnail screen (see page 74) appears,
with thumbnails of the frames where chapters are set.
The "S1", "S2", and "RS" marks on the thumbnails
indicate frames where Shot Mark1, Shot Mark2, and
Rec Start essence marks are set.
To delete the shot mark at a chapter position
You can delete the shot mark (Shot Mark1 or Shot Mark2)
at the chapter position in the chapter thumbnail screen.
(Rec Start cannot be deleted.)
1
In the chapter thumbnail screen, select the thumbnail
for the frame whose shot mark you want to delete.
2
Display the Thumbnail Menu.
3
Select Delete Shot Mark.
A message appears asking if you are sure that you want
to delete the shot mark.
Clip List:E0001
Delete Shot Mark
TC 00:00:00:00 TC 00:00:04:14
Delete 002?
TC 00:00:28:08 TC 00:00:35:15
TC 00:00:59:16 TC 00:01:06:18
28 JUL 2006 19:55
DATE&TIME
4
Select OK to delete the mark, or Cancel to cancel the
deletion, and then press the PUSH SET knob.
002/013
TC 00:00:12:04 TC 00:00:20:13
OK
TC 00:00:46:08 TC 00:00:53:22
Cancel
TC 00:01:13:11 TC 00:01:17:27
00:01:31:16
TOTAL DUR
To adjust the position of shot marks at chapter
positions
You can use the chapter thumbnail screen to adjust the
position of shot marks (Shot Mark1 and Shot Mark2) at
chapter positions. (The positions of Rec Start essence
marks cannot be adjusted.)
1
In the chapter thumbnail screen, select the thumbnail
of the shot mark whose position you want to adjust.
2
Display the Thumbnail Menu.
3
Select Move Shot Mark.
The Move Shot Mark screen is displayed.
Move Shot Mark : ShotMark2
TCR 00:28:23:14
You can perform playback and searches in this screen.
4
Use the PLAY button or the shuttle/jog dial in jog
mode (JOG indicator: lit) to display the frame you
want.
5
Select OK, and then press the PUSH SET knob.
To display the chapter thumbnail screen of the
previous or next clip with chapters
With the chapter thumbnail screen still active, press the
PREV button or the NEXT button.
The unit searches in the reverse or forward direction for the
next clip with chapters, beginning with the previous or
next clip.
Using essence marks to find scenes
See page 78 for more information about thumbnail screen
operations.
1
In the clip playback screen or the clip thumbnail
screen, press the THUMBNAIL/ESSENCE MARK
button with the SHIFT button held down.
The Select Essence Mark screen appears.
The names of essence marks that are not recorded on
the disc are displayed in gray.
0002/0002
OK
Cancel
81
Thumbnail Operations