When Using The Tool Box - Dell 2155cn User Manual

admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section08.fm
10 Press the
11 Press
(Set) button.
The cursor is located at the first octet of the IP address.
12 Use the ten keys to enter the first octet of the IP address, and then press
button.
The cursor moves to the next digit.
NOTE:
after entering each octet.
13 Enter the rest of the octets, and then press the
14 Press the
15 Press
(Set) button.
16 Repeat steps 12 and 13 to set Subnet Mask, and then press the
button.
17 Press the
18 Press
the
19 Repeat steps 12 and 13 to set the Gateway Address, and then press the
(Set) button.
20 Turn off the printer, and then turn it on again.

When Using the Tool Box

NOTE:
1 Click Start
Color Printer
NOTE:
printer drivers are installed on your computer. In this case, click the name of
this printer listed in Printer Names, and then click OK.
The Tool Box opens.
2 Click the Printer Maintenance tab.
3 Select TCP/IP Settings from the list at the left side of the page.
D E L L C O N F I D E N T I A L – P R E L I M I N A RY 9 / 1 3 / 1 0 - F O R P R O O F O N LY
Downloaded from ManualsPrinter.com Manuals
FILE LOCATION: C:\Users\fxstdpc-
(Back) button.
button until IP Address is highlighted, and then press the
You can only enter one octet at a time and must press
(Back) button.
button until Subnet Mask is highlighted, and then press the
(Back) button.
button until Gateway Address is highlighted, and then press
(Set) button.

All Programs
 Tool Box.
The Select Printer window appears in this step when multiple
 
Dell Printers
Setting the IP Address
(Set) button.
(Set)
Dell 2155 Multifunction
button
105