Accessing The Host Console - Oracle X4-2B Installation Manual

Accessing the Host Console

where username is a user account with Administrator privileges, and the SPIPaddress is the IP
address of the server module service processor.
The default Oracle ILOM Administrator account user name is root, and the password is
changeme.
After a successful log in to the server module Oracle ILOM, the Oracle ILOM prompt (->)
appears.
If the server module SP IP address is incorrect, see
■
Address (CLI)"on page 49
If this default Administrator account has been changed, contact your system administrator
■
for an Oracle ILOM user account with administrator privileges.
Note –
account and its password are provided with the system. To build a secure environment, you
must change the default password (changeme) for the default Administrator account (root)
after your initial login to Oracle ILOM. If this default Administrator account has since been
changed, contact your system administrator for an Oracle ILOM user account with
Administrator privileges.
Use Oracle ILOM CLI to configure Oracle ILOM and manage the server module.
4
Refer to Oracle ILOM 3.1 documentation for more information about how to use the CLI
interface to configure Oracle ILOM. See http://www.oracle.com/goto/ILOM/docs.
"5. Set up Server Module Software and Firmware (Oracle System Assistant)" on page 59
Next Steps ■
Accessing the Host Console
Connecting to a server module host console through Oracle ILOM allows you to perform
actions as if you were at the host.
Connect to a server module host console to perform the following tasks:
Access the server module BIOS setup program remotely
■
Install an OS on the server module.
■
Configure an OS on the server module.
■
Configure or install other software on the server module.
■
To connect to a server module host console, choose one of the following methods:
"Access Host Console (CLI)" on page 55
■
"Access Remote Host Console" on page 55
■
Access the server module serial console using Oracle ILOM command-line interface.
■
See
54 Sun Blade X4-2B Installation Guide • March 2014
to view the server module SP IP address using Oracle ILOM CMM.
To enable first-time login and access to Oracle ILOM, a default Administrator
"Set Up Server Module Using Local Serial Connection" on page
"Display Server Module Oracle ILOM SP IP
40.