Configure Preinstalled Oracle Vm Server - Oracle X4-2B Installation Manual

▼

Configure Preinstalled Oracle VM Server

These instructions describe how to configure only the preinstalled Oracle VM Server on your
server module. Oracle VM also has other components, such as Oracle VM Manager, that must
be installed or already up and running to support the virtual machine environment.
Gather the necessary organizational and network environment information needed to
Before You Begin
configure the software. See
Log in to the server module's Oracle ILOM.
1
Skip this step if you are already logged in to the server module's Oracle ILOM.
Choose one of the following methods:
Remotely from an Ethernet connection
■
See
Locally from a direct serial connection
■
See
Start the host console.
2
Chooseone of the following methods:
Oracle ILOM web interface:
■
a. Click Remote Control > Launch Remote Console.
b. Wait while the server boots, and the GRUB menu appears.
Oracle ILOM CLI:
■
a. Type: -> start /HOST/console
b. When prompted, type y to confirm:
c. Wait while the server boots, and the GRUB menu appears.
d. Press the up or down arrow to pause at this menu.
"Oracle VM Server Configuration Worksheet" on page
"Set Up Server Module Remote Using Ethernet Network Connection" on page
"Set Up Server Module Using Local Serial Connection" on page
Are you sure you want to start /HOST/console (y/n)? y
Serial console started.
Oracle VM Server Configuration Worksheet
84.
38.
40.
85