Log In To Oracle Ilom Sp (Cli) " On Page - Oracle X4-2B Installation Manual

Access the Remote Console feature of Oracle ILOM web interface.
■
See
▼
Access Host Console (CLI)
To connect to the server module serial console using Oracle ILOM command-line interface:
Log in to a server module's Oracle ILOM using an account with Administrator privileges.
1
Choose one of the following methods:
Serial management port, see
■
Client system network SSH session, continue with this task.
■
To access the host serial console, type:
2
-> start /HOST/console
The serial console output appears on the screen.
Note –
command followed by the start /HOST/console command.
To return to the Oracle ILOM console, press Esc followed by the ( character (Shift-9).
3
"Configuring Preinstalled Oracle Solaris OS" on page 75
■
Next Steps
"Configuring Preinstalled Oracle VM Software" on page 83
■
▼
Access Remote Host Console
Before you connect to the host console from a remote system, verify that the remote system
Before You Begin
meets the following requirements:
An operating system, such as Oracle Solaris, Oracle Enterprise Linux, or Windows, is
■
installed in the remote system.
■
■
The remote system is connected to a network with access to the CMM Ethernet
■
management port.
Java Runtime Environment (JRE) 1.5 or later is installed.
■
"Access Remote Host Console" on page
If the serial console is in use, stop the console session with the stop /HOST/console
If the remote system is running Oracle Solaris OS, disable volume management.
Disabling allows the remote console to access the physical floppy and CD/DVD-ROM
drives.
If the remote system is running Windows OS, disable Internet Explorer Enhanced
Security.
55.

"Log In to Oracle ILOM SP (CLI) " on page

Accessing the Host Console
53.
55