Configuring Preinstalled Oracle Vm Software - Oracle X4-2B Installation Manual

Configuring Preinstalled Oracle VM Software

If you plan to use the optional preinstalled Oracle VM software image on your server module,
finish the installation by configuring the pre-installed software. The preinstalled software image
contains all of the necessary drivers for your server.
This procedure only pre-installs OVM 3.x Server. Download OVM 3.x Manager,
Note –
templates and guest OSes from websites.
For information about available Oracle pre-installed operating system versions, go to
Note –
https://wikis.oracle.com/
display/SystemsComm/Sun+Blade+Systems+Products#tab:Operating-Systems.
The following table describes the tasks necessary for configuring the pre-installed Oracle VM.
Step Task
1 Preinstalled Oracle VM Image BIOS Boot Mode
Restriction
2 Fill out the Oracle VM Server configuration
worksheet for your server environment.
3 Configure preinstalled Oracle VM software.
4 Update the Oracle VM software.
5 Use the Oracle VM operating system.
Link
"Preinstalled Oracle VM Image BIOS Boot Mode
Restriction " on page 84
"Oracle VM Server Configuration Worksheet" on
page 84
"Configure Preinstalled Oracle VM Server" on
page 85
"Updating Oracle VM Software" on page 88
"Getting Started With Oracle VM" on page 88
83