Oracle X4-2B Installation Manual page 72

Configure Storage Drives (LSI Configuration Utilities)
In the Adapter Selection screen, click Start.
4
The MegaRAID BIOS Config Utility Virtual Configuration screen appears.
Click Virtual Drives.
5
The Virtual Drives screen appears.
Select the virtual drive that you want to make bootable.
6
Click Set Boot Drive, and then click Go.
7
When the operation is successfully completed, the Set Boot Drive value for this virtual drive
shows (current=selected VD).
"7. Set Up an Operating System and Drivers" on page 73
Next Steps ■
72 Sun Blade X4-2B Installation Guide • March 2014