Set Up Server Module Using Local Serial Connection - Oracle X4-2B Installation Manual

Connection Option Summary
▼

Set Up Server Module Using Local Serial Connection

This procedure requires you to have:
Before You Begin
Physical presence at the server module chassis.
■
Access to an Administrator account to log in to Oracle ILOM CLI.
■
Access to a terminal device or terminal emulator and RJ-45 serial cable.
■
A multi-port cable for server module connection.
■
You do not need an SP IP address to log in to Oracle ILOM using a serial connection and CLI.
To set up the server module with Oracle ILOM CLI through a local front panel serial
connection:
Attach the multi-port universal connector port (UCP) connector to the UCP port on the server
1
module front panel.
Caution –
service purposes. Disconnect the multi-port cable from the server module after the
configuration or service operation is complete to avoid damaging the cable or connector.
40 Sun Blade X4-2B Installation Guide • March 2014
Cable or connector damage hazard. Use the multi-port cable for configuration and