Preinstalled Operating System Raid Limitations; Oracle Solaris Os Documentation; Configuration Worksheet - Oracle X4-2B Installation Manual

Preinstalled Operating System RAID Limitations

server will not boot the Oracle Solaris preinstalled image and it cannot be used. If you want to
switch to UEFI BIOS Boot Mode and use Oracle Solaris 11.1, you have to do a fresh install of the
Oracle Solaris 11.1 OS.
Preinstalled Operating System RAID Limitations
Configuring RAID for the server is optional. However, the Oracle Solaris preinstalled image can
only be configured in a non-RAID configuration. If a RAID configuration is required, you must
configure RAID on the server and then perform a fresh install of the Oracle Solaris OS (or other
OS) in the desired RAID configuration.

Oracle Solaris OS Documentation

For information about using your Oracle Solaris operating system, go to:
http://www.oracle.com/
technetwork/server-storage/solaris11/documentation/index.html

Configuration Worksheet

Gather the following information, and have it ready for when you begin the configuration
process. You need to collect only the information that applies to your organization and network
environment.
Required Installation
Information
Language
Locale
Terminal
Network
connection
DHCP
76 Sun Blade X4-2B Installation Guide • March 2014
Description
Select from the list of available languages for the OS.
Select your geographic region from the list of available locales.
Select the type of terminal that you are using from the list of
available terminal types.
Is the system connected to a network?
Can the system use Dynamic Host Configuration Protocol
(DHCP) to configure its network interfaces?
Your Answers—an asterisk
(*) identifies the default
English*
English (C - 7-bit
ASCII)*
■
Networked
■ Non-networked*
■
Yes
■ No*