Oracle X4-2B Installation Manual page 71

Access the LSI SG-SAS6-R-REM-Z HBA BIOS.
2
Choose one of the following methods.
Skip this step if you have accessed the WebBIOS screen.
■
If you have just created a virtual drive using
Note –
Configuration Utility)" on page
have exited the WebBIOS utility, restart the WebBIOS main menu.
If your system BIOS is running in UEFI boot mode, access the LSI BIOS through the system
■
BIOS Setup utility.
Refer to the Oracle X4 Series Server Administration Guide for more information.
If your system BIOS is running in Legacy boot mode:
■
a. Boot the system, watch the messages as they appear on the screen, and wait for the LSI
banner.
b. When prompted on the banner page, press the Control+H key combination.
Access the WebBIOS main menu.
3
The Adapter Selection screen appears.
Configure Storage Drives (LSI Configuration Utilities)
"Configure Storage Drives (LSI WebBIOS
69, you might already be at the WebBIOS screen. If you
71