Table of Contents
Advertisement
SG-SAS6-R-REM-Z Host Bus Adapter
The Oracle System Assistant System Overview screen appears.
Click Configure Hardware.
2
The Configure Hardware RAID Configuration screen appears.
From the HBA drop-down list, select the host bus adapter (HBA).
3
SG-SAS6-R-REM-Z
Select the RAID level.
4
SG-SAS6-R-REM-Z: Use RAID 0, 1, or 10
Oracle System Assistant supports only RAID 0, RAID 1, and RAID 10.
From the list in the Available Disks section, select the disks to include in the volume.
5
Click Create Volume.
6
The volume appears in the Created Volumes section list after the volume is created.
Click Volume Details.
7
Type a volume name.
(Optional for SG-SAS6-R-REM-Z HBA) Set the volume as bootable.
8
In the Created Volumes section, select the volume that you just created.
■
Click Set Volume for Boot.
■
Note –
"7. Set Up an Operating System and Drivers" on page 73
■
Next Steps
66
Sun Blade X4-2B Installation Guide • March 2014
Skip this step for the SG-SAS6-REM-Z HBA.
Advertisement
Chapters
Table of Contents
