Powering Off The Server Module - Oracle X4-2B Installation Manual

Powering Off the Server Module

Powering Off the Server Module
If you need to power off the server module, you can perform a graceful shutdown or an
immediate shutdown.
▼
Graceful Shutdown (Power Button)
●
Press and release the Power button on the front panel of the server module.
Note –
Related Information
More Information
"Resetting the Server" on page 108
■
▼
Graceful Shutdown (Oracle ILOM Web Interface)
Log in to the Oracle ILOM web interface for the server module SP or CMM.
1
Click Host Management > Power Control.
2
The Power Control page appears.
Use one of the following commands for orderly system shutdown:
3
From the server module SP web interface Actions menu, select Graceful Shutdown and
■
Power Off.
From the CMM web interface, click the radio button next to /CH/BLn/System, and select
■
Graceful Shutdown and Power Off from the Actions list.
where n is the chassis slot that the blade is installed in.
Related Information
More Information
"Resetting the Server" on page 108
■
106 Sun Blade X4-2B Installation Guide • March 2014
To completely power off the server, you must remove the server module from the chassis.