Oracle X4-2B Installation Manual page 51

ipdiscovery = dhcp
ipgateway = 10.134.210.254
ipnetmask = 255.255.255.0
macaddress = 00:21:28:BB:D7:22
managementport = /SYS/SP/NET0
outofbandmacaddress = 00:21:28:BB:D7:22
pendingipaddress = 10.134.210.152
pendingipdiscovery = dhcp
pendingipgateway = 10.134.210.254
pendingipnetmask = 255.255.255.0
pendingmanagementport = /SYS/SP/NET0
sidebandmacaddress = 00:21:28:BB:D7:23
state = enabled
Commands:
cd
set
show
->
View the Oracle ILOM SP address in the Properties list.
5
For example: ipaddress = 10.134.210.152.
Note the network configurations, including the server module's SP IP address.
6
You need to know the SP IP address to log in directly to a server module Oracle ILOM.
(Optional) Set a static IP address.
7
By default, the IP address of the server module SP is configured using DHCP.
To set a static IP address, refer to the Oracle ILOM 3.1 documentation.
■
http://www.oracle.com/goto/ILOM/docs
To log out of Oracle ILOM CMM, type:
8
-> exit
"5. Set up Server Module Software and Firmware (Oracle System Assistant)" on page 59
Next Steps ■
Access Server Module SP Oracle ILOM
Choose a method to access a server module's service processor (SP) Oracle ILOM, as described
in the following sections:
"Log In to Oracle ILOM SP (Web Interface) " on page 52
■
"Log In to Oracle ILOM SP (CLI) " on page 53
■
Access Server Module SP Oracle ILOM
51